Description
Silic8 Solo Primer (MPL2)
Vapour open primer with similar qualities to MPL1 but with a finer grit for thin coat plasters.
Preparation
Substrates must be clean, dry and free from any loose material prior to application.
Test a small area for suitability with your specific materials before use. Do not use on contaminated surfaces, extreme environments or in any unusual circumstances. Do not store or use in extremes of temperature (below 5C or above 30C).
Protect surrounding surfaces, particularly glass.
Store in airtight containers and use within 12 months. Do not store, or use in temperatures below 5C or above 30C.
Application
Stir well before use. Apply with a broad brush using short strokes and ensuring that the grit is evenly spread across the surface. The surface needs to be primed and must be sound as well as dry. Where the surface is powdery or friable, work the plaster primer into the affected areas with a brush and test for bond strength after 24 hours.
Silic8 vapour open liquid primer penetrating solution (PS1 or PS2) is recommended prior to application on problematic or highly adsorbent surfaces. Allow to cure for 2-24 hours depending on temperature and applied thickness.
Appropriate vapour open plasters can be applied at any point after 24 hours and once Silic8 MPL1 primer has fully cured. Ensure that the plaster primer is appropriate to the task.
Coverage
On an even surface 500grams of Silic8 MPL2 primer will cover approximately 1m²
Aftercare
Allow to dry completely before further application, plaster coverings or decoration.
Wash splashes, tools and brushes with water.
Dispose of all surplus material in accordance with your local regulations (EWC 06 02 99).
Cleaned tins are 100% reusable and recyclable.
